Alıştırma: Protobuf Ayrıştırma

In this exercise, you will build a parser for the protobuf binary encoding. Don’t worry, it’s simpler than it seems! This illustrates a common parsing pattern, passing slices of data. The underlying data itself is never copied.

Fully parsing a protobuf message requires knowing the types of the fields, indexed by their field numbers. That is typically provided in a proto file. In this exercise, we’ll encode that information into match statements in functions that get called for each field.

We’ll use the following proto:

message PhoneNumber {
  optional string number = 1;
  optional string type = 2;
}

message Person {
  optional string name = 1;
  optional int32 id = 2;
  repeated PhoneNumber phones = 3;
}

Messages

A proto message is encoded as a series of fields, one after the next. Each is implemented as a “tag” followed by the value. The tag contains a field number (e.g., 2 for the id field of a Person message) and a wire type defining how the payload should be determined from the byte stream. These are combined into a single integer, as decoded in unpack_tag below.

Varint

Integers, including the tag, are represented with a variable-length encoding called VARINT. Luckily, parse_varint is defined for you below.

Wire Types

Proto defines several wire types, only two of which are used in this exercise.

The Varint wire type contains a single varint, and is used to encode proto values of type int32 such as Person.id.

The Len wire type contains a length expressed as a varint, followed by a payload of that number of bytes. This is used to encode proto values of type string such as Person.name. It is also used to encode proto values containing sub-messages such as Person.phones, where the payload contains an encoding of the sub-message.

Alıştırma

The given code also defines callbacks to handle Person and PhoneNumber fields, and to parse a message into a series of calls to those callbacks.

What remains for you is to implement the parse_field function and the ProtoMessage trait for Person and PhoneNumber.

/// A wire type as seen on the wire.
enum WireType {
    /// The Varint WireType indicates the value is a single VARINT.
    Varint,
    // The I64 WireType indicates that the value is precisely 8 bytes in
    // little-endian order containing a 64-bit signed integer or double type.
    //I64,  -- not needed for this exercise
    /// The Len WireType indicates that the value is a length represented as a
    /// VARINT followed by exactly that number of bytes.
    Len,
    // The I32 WireType indicates that the value is precisely 4 bytes in
    // little-endian order containing a 32-bit signed integer or float type.
    //I32,  -- not needed for this exercise
}

#[derive(Debug)]
/// A field's value, typed based on the wire type.
enum FieldValue<'a> {
    Varint(u64),
    //I64(i64),  -- not needed for this exercise
    Len(&'a [u8]),
    //I32(i32),  -- not needed for this exercise
}

#[derive(Debug)]
/// A field, containing the field number and its value.
struct Field<'a> {
    field_num: u64,
    value: FieldValue<'a>,
}

trait ProtoMessage<'a>: Default {
    fn add_field(&mut self, field: Field<'a>);
}

impl From<u64> for WireType {
    fn from(value: u64) -> Self {
        match value {
            0 => WireType::Varint,
            //1 => WireType::I64,  -- not needed for this exercise
            2 => WireType::Len,
            //5 => WireType::I32,  -- not needed for this exercise
            _ => panic!("Invalid wire type: {value}"),
        }
    }
}

impl<'a> FieldValue<'a> {
    fn as_str(&self) -> &'a str {
        let FieldValue::Len(data) = self else {
            panic!("Expected string to be a `Len` field");
        };
        std::str::from_utf8(data).expect("Invalid string")
    }

    fn as_bytes(&self) -> &'a [u8] {
        let FieldValue::Len(data) = self else {
            panic!("Expected bytes to be a `Len` field");
        };
        data
    }

    fn as_u64(&self) -> u64 {
        let FieldValue::Varint(value) = self else {
            panic!("Expected `u64` to be a `Varint` field");
        };
        *value
    }
}

/// Parse a VARINT, returning the parsed value and the remaining bytes.
fn parse_varint(data: &[u8]) -> (u64, &[u8]) {
    for i in 0..7 {
        let Some(b) = data.get(i) else {
            panic!("Not enough bytes for varint");
        };
        if b & 0x80 == 0 {
            // This is the last byte of the VARINT, so convert it to
            // a u64 and return it.
            let mut value = 0u64;
            for b in data[..=i].iter().rev() {
                value = (value << 7) | (b & 0x7f) as u64;
            }
            return (value, &data[i + 1..]);
        }
    }

    // More than 7 bytes is invalid.
    panic!("Too many bytes for varint");
}

/// Convert a tag into a field number and a WireType.
fn unpack_tag(tag: u64) -> (u64, WireType) {
    let field_num = tag >> 3;
    let wire_type = WireType::from(tag & 0x7);
    (field_num, wire_type)
}


/// Parse a field, returning the remaining bytes
fn parse_field(data: &[u8]) -> (Field, &[u8]) {
    let (tag, remainder) = parse_varint(data);
    let (field_num, wire_type) = unpack_tag(tag);
    let (fieldvalue, remainder) = match wire_type {
        _ => todo!("Based on the wire type, build a Field, consuming as many bytes as necessary.")
    };
    todo!("Return the field, and any un-consumed bytes.")
}

/// Parse a message in the given data, calling `T::add_field` for each field in
/// the message.
///
/// The entire input is consumed.
fn parse_message<'a, T: ProtoMessage<'a>>(mut data: &'a [u8]) -> T {
    let mut result = T::default();
    while !data.is_empty() {
        let parsed = parse_field(data);
        result.add_field(parsed.0);
        data = parsed.1;
    }
    result
}

#[derive(Debug, Default)]
struct PhoneNumber<'a> {
    number: &'a str,
    type_: &'a str,
}

#[derive(Debug, Default)]
struct Person<'a> {
    name: &'a str,
    id: u64,
    phone: Vec<PhoneNumber<'a>>,
}

// TODO: Implement ProtoMessage for Person and PhoneNumber.

#[test]
fn test_id() {
    let person_id: Person = parse_message(&[0x10, 0x2a]);
    assert_eq!(person_id, Person { name: "", id: 42, phone: vec![] });
}

#[test]
fn test_name() {
    let person_name: Person = parse_message(&[
        0x0a, 0x0e, 0x62, 0x65, 0x61, 0x75, 0x74, 0x69, 0x66, 0x75, 0x6c, 0x20,
        0x6e, 0x61, 0x6d, 0x65,
    ]);
    assert_eq!(person_name, Person { name: "beautiful name", id: 0, phone: vec![] });
}

#[test]
fn test_just_person() {
    let person_name_id: Person =
        parse_message(&[0x0a, 0x04, 0x45, 0x76, 0x61, 0x6e, 0x10, 0x16]);
    assert_eq!(person_name_id, Person { name: "Evan", id: 22, phone: vec![] });
}

#[test]
fn test_phone() {
    let phone: Person = parse_message(&[
        0x0a, 0x00, 0x10, 0x00, 0x1a, 0x16, 0x0a, 0x0e, 0x2b, 0x31, 0x32, 0x33,
        0x34, 0x2d, 0x37, 0x37, 0x37, 0x2d, 0x39, 0x30, 0x39, 0x30, 0x12, 0x04,
        0x68, 0x6f, 0x6d, 0x65,
    ]);
    assert_eq!(
        phone,
        Person {
            name: "",
            id: 0,
            phone: vec![PhoneNumber { number: "+1234-777-9090", type_: "home" },],
        }
    );
}

// Put that all together into a single parse.
#[test]
fn test_full_person() {
    let person: Person = parse_message(&[
        0x0a, 0x07, 0x6d, 0x61, 0x78, 0x77, 0x65, 0x6c, 0x6c, 0x10, 0x2a, 0x1a,
        0x16, 0x0a, 0x0e, 0x2b, 0x31, 0x32, 0x30, 0x32, 0x2d, 0x35, 0x35, 0x35,
        0x2d, 0x31, 0x32, 0x31, 0x32, 0x12, 0x04, 0x68, 0x6f, 0x6d, 0x65, 0x1a,
        0x18, 0x0a, 0x0e, 0x2b, 0x31, 0x38, 0x30, 0x30, 0x2d, 0x38, 0x36, 0x37,
        0x2d, 0x35, 0x33, 0x30, 0x38, 0x12, 0x06, 0x6d, 0x6f, 0x62, 0x69, 0x6c,
        0x65,
    ]);
    assert_eq!(
        person,
        Person {
            name: "maxwell",
            id: 42,
            phone: vec![
                PhoneNumber { number: "+1202-555-1212", type_: "home" },
                PhoneNumber { number: "+1800-867-5308", type_: "mobile" },
            ]
        }
    );
}